Intelligent-motion-systems UDAS-1001E Instrukcja Użytkownika Pobierz pdf (Strona 23)

Configuration and Installation

2-4

Channels connected to a thermocouple must be connected to bias resistors for proper operation.

Use jumpers JP2 and JP3.

To select the jumpers for each channel that you plan to use for thermocouples, use TABLE 2.1,

CJC Jumper Positions shown below.

TABLE 2.1 CJC Jumper Positions

Note: When monitoring thermocouples, always use differential channels.

Differential JP1 Jumper Position JP2 Jumper Position

Channel #

1 AI 1 AI 9

2 AI 2 AI 10

3 AI 3 AI 11

4 AI 4 AI 12

5 AI 5 AI 13

6 AI 6 AI 14

7 AI 7 AI 15

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 64 65

Brak uwag

Intelligent-motion-systems UDAS-1001E Instrukcja Użytkownika Strona 23